HYBREX G1E - Program 70-CD-Ip: Isdn Interface Specifications Program - G1 E; Program 69-Gp-Ip: Hunt Group Assignment - Night & Lunchtime; Program 71-CD-Ip: Calling Line Identification Presentation

G1E Programming Manual
165
Program 71-Cd-IP : Calling Line Identification Presentation
71-Cd-IP CLIP Table
dddddddddddd
Cd = 01-06, IP = 01-12
System default
General:
To assign up to 6 specific numbers that an extension can present to the Exchange on an outgoing call.
Description:
This parameter can substitute CLIP information that will be presented to the Exchange when a Station makes an
outgoing call. Not all exchanges will accept and pass on this information and if a CLIP is entered in mode 71 that
is not a valid number in the assigned range of the customer the exchange will ignore this information also. Mode
71 contains 6 different tables which once programmed can be allocated to Stations in Mode 78-stn-06. Many
exchanges are quite specific in the way they will accept CLIP. Some want local number, some want National
number with area code and some want National number with area code but without the leading 0.