HYBREX G1E - Program 05-24-Ip: System Timing Parameters - 24

108 Issue 3.3.2 / April, 2011
Program 05-24-IP : System Timing Parameters – 24
05-16-IP SYS PAR
0 0 0 0 0 0 0 0
IP = 01-08
System Default.
Item Display Programming Data Timing
Pointer Data Description Table Default
---------- ---------- ----------------------------------------------------------- ---------- ------------
01 0- Reserved 0=
02 0- Reserved 0=
03 0- Reserved 0=
04 0-8 G1E Monitor System Tracking 0=Disable
05 0- Reserved 0=
06 0-1 G1E Monitor RS232 Output 0=Disable
07 0-3 G1E Monitor DSP trace 0=Disable
08 0-3 G1E Monitor VMC Trace 0=Disable
Description:
01. Reserved:
02.Reserved:
03. Reserved:
04. G1E Monitor System Tracking
This parameter enables the G1E monitor system and handset tracking features.
0= Disable
2 = enable monitor Tx to DK phone trace
3 = enable monitor Tx to DK phone trace
4 = enable monitor SWITCH ACTION trace
5 = enable monitor SWITCH ACTION trace
6 = enable monitor SWITCH ACTION trace & monitor Tx to DK phone trace
7 = enable monitor Tx to DK phone trace &monitor SWITCH ACTION trace
05. Reserved: