G1E Programming Manual
83
05: DISA Special Function Access:
This parameter sets which of the system functions are able to be accessed by DISA callers.
0 = DISA can access an outside line by [9]/[0] + Password.
User can access mail box from external call by [#]
1 = DISA cannot access an outside line by [9]/[0] + Password.
User can access mail box from external call by [#]
2 = DISA can access an outside line by [9]/[0] + Password.
User cannot access mail box from external call by [#]
3 = DISA cannot access an outside line by [9]/[0] + Password
User cannot access mail box from external call by [#]
06. DISA Re-check Times To Station/Console:
This function sets the number of times that an unsuccessful DISA call will attempt to retry a station and
or transfer to a console after the ringing time set in Mode 05-08-06 depending on the setting for
individual stations in Mode 46-st-04. If polarity reversal or Clear Forward is available and enabled, set
this parameter to 9 and the call will continue to retry until the caller hangs up.
0 = 2 times 1 = 3 times 2 = 4 times ..........8= 10 times 9 = Infinite times
07. Door Phone Ringing Time:
This parameter sets the time that Door Phone ring assigned stations will ring for when the Door Phone
button is pressed.
0 = 5 Sec. 1 = 10 Sec. 2 = 15 Sec. 3 = 20 Sec ...........9 = 50 Sec.
08. DISA Single Digit Dialling:
This feature allows a DISA caller to dial stations by 1 digit (1-8) using the Hunt Groups (01-08) settings
in Mode 67, 68, and 69 to set which station(s) will be dialled by each digit. See mode 05-16-03 for
additional setting information.
0=Disable
1=Enable at Day
2=Enable at Night
3=Enable at Day & Night
4=Enable at Noon
5=Enable at Noon & Day
6=Enable at Noon & Night
7=Enable at Noon & Night & Day
Please reference 05-16-03
TIMING TABLE
Grade 0 1 2 3 4 5 6 7 8 9 unit
C 0 2 4 6 8 15 30 60 120 254 sec.
To Next Page
Loading...