G1E Programming Manual
131
05. Pick Up:
0 = Day - can not Night - can not
1 = Day - can not Night - can
2 = Day - can Night - can not
3 = Day - can Night - can
Can = An incoming call on this line can be answered by non-ringing stations.
Can not = An incoming call on this line can not be answered by non-ringing stations.
This feature is to assign "Private Lines" in conjunction with the programming of dial 9 groups, or to prevent
incoming calls being answered by users other than the ring assigned stations.
06. Loud Bell:
Refer to Program 06 to assign Relay to operate for a Loud Bell.
0 = No Operation.
1 = RELAY on the MSC (R) will be activated when the trunk is ringing.
The system does not provide any voltage from the assigned relay. A separate ring voltage and ring device will
need to be provided by the installer
07. Inward Line Ringing Method Assignment (Day):
As described in Program 01-tk-IP, there are four ringing methods plus a Private line setting:
COMMON AUDIBLE
Ring all assigned Extensions simultaneously.
LINEAR
Each incoming call rings the first available Extension in order of the Extensions assigned in Program 01-tk.
CIRCULAR
The first incoming call on each trunk rings the first assigned Extension, the 2nd incoming call on that trunk rings
the next station, etc.
HUNT
If an incoming line rings an extension which is busy or does not answer, after the assigned Hunt Time (Program
05-08-01,) the call will ring the next available extension assigned in the same group. If the next ringing station is
busy then the call will immediately move to the next ring assigned extension but if the station does not answer
then the call will wait for the Hunt time and then ring the next assigned extension. Once the ring assignment has
passed a station which is busy then it will provide Off Hook Busy Remind signal and when the station is free if
the call is still unanswered the station will commence ringing for that call. Stations which do not answer a call will
also continue to ring until the call is answered.
PRIVATE
This is for an incoming line to be able to follow Call Forward settings.. The stations that ring for this private line
can set call forward (All, Busy, No Answer) for this private line to the Voice Mail Port (See Program 43- ST-02) or
off premises. The ringing will be common audible.
0 = Day - COMMON AUDIBLE 1 = Day - LINEAR 2 = Day - CIRCULAR
3 = Day - HUNT 4 = Day – PRIVATE
08. Inward Line Ringing Method Assignment (Night):
To Next Page
Loading...