126 Issue 3.3.2 / April, 2011
Program 20-nn- : Set Day – Time / Lunch Time Schedule
20-nn Day Time
00 00 00 00 00
nn = Day schedule pointer (00-06)
Setting data
General:
This program assigns day, night and lunch time from Sunday to Saturday for automatic night switching.
Description:
The system is capable of switching automatically between day / lunch break / night settings using the time
parameters set in this Mode. To change from manual to automatic night switching the console presses [PRG]
/[TRF/FL] / *. Pressing * toggles between the 3 modes.
If a Function key has been set to function 52 then pressing this key will change from Day to night mode by one
touch but will not change between Automatic and Manual switching.
00 = Sunday
01 = Monday
02 = Tuesday
03 = Wednesday
04 = Thursday
05 = Friday
06 = Saturday
Example
20-01 Day Time
08 30 17 00 12
20-01 Day Time
30 13 30
On Monday the system will switch from Night time to Daytime start at 8:30 in the morning, will switch to
lunchtime start at 12:30, switch back to daytime at 13:30 and switch to Night time at 17:00. To program no
lunchtime leave the entries for items 03 and 04 on 00.
To Next Page
Loading...
