158 Issue 3.3.2 / April, 2011
Program (51 to 59)-code-IP : Toll Plans – Allowed Digits – Class 1 to 9
51-code-01 Allow
- - - - - - - - - - - - -
code = code no 01-16, IP = 01-12
System default
General:
This program sets allowed exception numbers for Toll Class 1. These Modes should be read in conjunction with
Modes 61 to 66.
Description:
There are 16 codes for each Toll Class and each code contains up to 12 digits
In default any station allocated to Toll Plans 1 to 6 will be able to dial unrestricted until the associated Modes are
programmed.
Allowed entries in this Mode are 0 to 9, d and _. d = Don't care and means that any digit can be dialled in this
position. _ = No digit is allowed to be dialled beyond this position. If a digit is allowed as the beginning of a
number then the entry should be filled with don't care's to the end of the line or the caller will not be able to dial
the full number.
Modes 51 to 56 are used in conjunction with Modes 61 to 66 and Modes 57 to 59 are used independently.
Toll Classes:
Class Function Prog. Mode
0
Unrestricted Default
1
Use Mode 51 for the Unrestricted numbers. Use Mode 61 for the Restricted numbers
Mode 51,61
2
Use Mode 52 for the Unrestricted numbers. Use Mode 62 for the Restricted numbers
Mode 52,62
3
Use Mode 53 for the Unrestricted numbers. Use Mode 63 for the Restricted numbers
Mode 53,63
4
Use Mode 54 for the Unrestricted numbers. Use Mode 64 for the Restricted numbers
Mode 54,64
5
Use Mode 55 for the Unrestricted numbers. Use Mode 65 for the Restricted numbers
Mode 55,65
6
Use Mode 56 for the Unrestricted numbers. Use Mode 66 for the Restricted numbers
Mode 56,66
7
Use Mode 57 for the Unrestricted numbers.
Mode 57
8
Use Mode 58 for the Unrestricted numbers.
Mode 58
9
Use Mode 59 for the Unrestricted numbers.
Mode 59
*
Use Mode 51-56 for unrestricted numbers. Use Mode 61-66 for all restricted numbers 000
D Cannot access the trunk line.
Note 1: Default numbers in Mode 61, 62, 63, 65, 66 are: dddddddd
Note 2: Default numbers in Mode 51, 52, 53, 55, 56, 57, 58, 59 are:------------
Note 3: d: Don't care: any digit is allowed in this position.
Note 4: _: The system does not allow any digits dialled after this symbol.
Default : 59-01=000dddddddddd