HYBREX G1E - Security Alarm and Fire Alarm Stop Timer; Reserved; Play Transfer Message for Ecf; High Frequency Level of Dtmf Generator

G1E Programming Manual
97
05. Security Alarm and Fire Alarm stop timer:
This parameter sets the time that the Security Alarm or Fire Alarm will ring when the feature is triggered.
0 = no limit 1 = 1 min ~ 9 =9min
Reserved:
06. Play Transfer message for ECF:
This parameter will enable the playing of the ECF message to an incoming caller when they are being
transferred to an external number by the system
0 = Disable 1 = Enable
07. High Frequency Level of DTMF Generator:
This parameter modifies the level of the High frequency DTMF Generator. This should not be modified
under any circumstances.
0 = -16.8dBm 1 = -16 dBm 2 = -14.8dBm 3 = -13.4dBm 4 = -12.4dBm
5 = -11.4dBm 6 = -10.2dBm 7 = -9 dBm 8 = -8.5 dBm 9 = -7.8 dBm
08. Low Frequency Level of DTMF Generator :
This parameter modifies the level of the low frequency DTMF Generator. This should not be modified
under any circumstances.
0 = -16.8dBm 1 = -16 dBm 2 = -14.8dBm 3 = -13.4dBm 4 = -12.4dBm
5 = -11.4dBm 6 = -10.2dBm 7 = -9 dBm 8 = -8.5 dBm 9 = -7.8 dBm