Hypertherm XPR460 - Page 112

■
Prepare the hoses, cables, and leads on page 105
■
Refer to the image that shows the connectors on the rear of the cooler.
Figure 26 - Connectors on the rear of the cooler
1
2
3
4 5
8
9
6
7
1 Coolant supply to the gas connect console
2 Coolant return from the gas connect console
3 Coolant supply to the plasma power supply
4 Coolant return from the plasma power supply
5 Power, 220 VAC, from the plasma power supply
6 Not used
7 Not used
8 CAN in from the plasma power supply
9 CAN out to the gas connect console
1. Connect the coolant-hose assembly to the cooler from the plasma power supply:
The coolant-hose assembly includes one coolant-supply hose with
green bands and one coolant-return hose with red bands.
Installation
3
112
811530 Instruction Manual XPR460