WARNING
INCORRECT SUPPLY-GAS CONNECTIONS CAN CAUSE AN EXPLOSION
OR FIRE
An explosion or fire can occur if a supply-gas hose is connected to the wrong port
on a gas connect console.
NEVER connect a supply gas to a hose, connection, or fitting that is not designed
for that gas type or pressure.
WARNING
MISSING CHECK VALVES CAN CAUSE AN EXPLOSION OR FIRE
An explosion or fire can occur if the cutting system is operated without check
valves.
Never remove a check valve.
NOTICE
PTFE TAPE CAN CAUSE CLOGGED VALVES, REGULATORS, AND TORCHES
Never use PTFE tape on any joint preparation. Use only a liquid or paste thread sealant on male
thread ends.
Installation
3
129811530Instruction ManualXPR460
To Next Page
Loading...
