Hypertherm XPR460 - Page 85

Refer to Connect the plasma power supply on page 106.
☐
Coolant-supply hose and coolant-return hose to the cooler
☐
Power cable, 220 VAC, to the cooler
☐
Power cable, 120 VAC, to the gas connect console
☐
CAN cable to the cooler
☐
Pilot-arc cable to the gas connect console
☐
Both negative cables ( - ) to the gas connect console
☐
Both work cables to the cutting table
☐
Connect all of the hoses, cables, and leads to the cooler.
Refer to Connect the cooler on page 111.
☐
Coolant-supply hose and coolant-return hose from the plasma power supply
☐
Coolant-supply hose and coolant-return hose to the gas connect console
☐
Power cable, 220 VAC, from the plasma power supply
☐
CAN cable from the plasma power supply
☐
CAN cable to the gas connect console
☐
Connect all of the hoses, cables, and leads to the gas connect console.
Refer to Connect the gas connect console on page 114.
☐
Coolant-supply hose and coolant-return hose from the cooler
☐
Power cable, 120 VAC, from the plasma power supply
☐
CAN cable from the cooler
☐
Both negative cables ( - ) from the plasma power supply
☐
Pilot-arc cable from the plasma power supply
☐
Connect both work cables to the cutting table.
☐
Connect the cable and lead assemblies between the Core or CorePlus gas connect console and
TorchConnect console.
Refer to Connect the gas connect console (Core, CorePlus) to the TorchConnect console on page
118.
The number and type of gas hose connections is based on the type of gas connect console you have.
☐
Pilot-arc and coolant-hose assembly
☐
Power, CAN, and 3-gas assembly
☐
Power, CAN, and 4-gas assembly
☐
Connect the cable and lead assemblies between the VWI or OptiMix gas connect console and
TorchConnect console.
Installation
3
85811530Instruction ManualXPR460