2014-03-24
83
4.2 Test
In Magnetic tap, you can do the read/write of the magnetic stripe card.
“Read” is the reading of the magnetic stripe card and show the date. In fact “Read” is consist of “Do Read” and
“Read All Buffer” but operated at one time. “Do Read” is read the magnetic data in the printer inside. “Read All
Buffer” is bring the data to PC. So “Read” is same as “Do Read” and “Read All Buffer”. Only checked track can be
concerned.
“Write” is the writing of the magnetic stripe card and record the date. “Write” is also consist of “Write All Buffer” and
“Do Write”. “Write All Buffer” is send the encoding date to the printer, “Do Write” is recording the data to the
magnetic card. You can choose “Lo Co”/”Hi Co” as its card type. “Random Fill” is inputting the random date to test.
To Next Page
Loading...
