4-46
SECTION 4
OPERATION
If Upper Limit Function is desired,
configure as follows:
OFF/ON
Toggles Upper Limit Function ON or
OFF. Enter Limit Value. Range is 0 to
200 W.
If Lower Limit Function is desired,
configure as follows:
OFF/ON
Toggles Lower Limit Function ON or
OFF. Enter Limit Value. Range is 0 to
200 W.
If Alarm Function is desired, configure as
follows:
OFF/ON
Toggles Alarm Function ON or OFF.
When activated, alarm alerts over range
condition.
RETURN
Returns to RF Receive Operation
Screen.
Upper Limit:
Lower Limit:
ON
ON 12.0
28.0
Lower Limit:
Alarm:
ON
OFF
12.0
Lower Limit:
Alarm:
ON
OFF
12.0
To Next Page
Loading...
General