1-2
SECTION 1
INTRODUCTION
1-2 RF GENERATE OPERATION
Generating
The COM-120C is capable of generating CW or modulated signals from 250 kHz to
1000 MHz.
The output level is variable from -130 to -13 dBm.
Modulation types include AM, FM and PM (Phase Modulation) or apply an external
modulation source. Generate DTMF, User Defined Tone Codes or Digital Codes.
Meters
Metering functions include SINAD, Distortion and Audio Frequency Level.
Full Oscilloscope and Spectrum Analyzer operation is available.
Testing
Testing in RF Generate Operation includes Receiver Sensitivity, Receiver Selectivity,
and Audio Frequency Level measurements.
Use the decode capability for defined DCS and POCSAG
protocols using the Tone and Digital Coding functions.
O
T
e
n
To Next Page
Loading...