IFR COM-120C

6-37
SECTION 6
OPTIONS
6-12-10 AUXILIARY SETUP SCREEN CONFIGURATION
o From LTR
Trunking Menu, select “3. Auxiliary Setup.”
o
If Mobile Radio RIC Test is required, set RADIO RIC ID (1) to Radio Interconnect
Channel (RIC). IF RIC Operation is not required, set to value with no Dispatch
Operation interference.
o
If Mobile Radio Busy Home Repeater Test is desired, enter Free Repeater Channel
for FREE REP CHAN (2).
o
If testing devices set for Border Offset, set BORDER OFFSET (3) to ENABLED. If
Border Offset is not required, set BORDER OFFSET (3) to DISABLED.
o
Set SYSTEM SYNC (4) to 158 unless nonstandard system is tested.
o
Set DECODE DATA (5) to NORMAL or INVERT. Invert enables the LTR option to
work in any frequency band up to
1 GHz regardless of polarity.
o
Set ENCODE DATA (6) to NORMAL or INVERT. Invert enables the LTR option to
work in any frequency band up to 1 GHz regardless of polarity.
o
Press RETURN Soft Function Key F6 to return to LTR Trunking Menu.