6-12
SECTION 6
OPTIONS
Encoding of the analog formats is available in RF Generate, Duplex Generate and
Audio/Data/Signaling Generators Operation Screens. In the RF Generate and Duplex
Generate Operation Screens, these formats are accessed by selecting GEN1 (Audio
Generator-1) as a modulation source.
In the Audio/Data/Signaling Generators Operation Screen, these formats are accessed
through Audio Generator-1. Refer to Section 3-3, Screens, Softkeys and Menus for
information on selecting these formats.
Decoding of the analog formats is available in RF Receive and Duplex Receive
Operation Screens. Select the desired signaling format for decoding at the Tone/Data
Code Field. Refer to Section 3-3, Screens, Softkeys and Menus for information on
selecting these formats.
For information on Digital Signaling Formats refer to the following:
6-9-1 Modulating RF Signals With Digital Signaling Formats
6-9-2 Encoding Digital Signaling Formats for Audio Signal
6-9-3 Decoding Digital Signaling Formats
6-9-4 Testing A Receiver using Digital Signaling Formats
6-9-5 Testing A Transmitter using Digital Signaling Formats
To Next Page
Loading...