i
PREFACE
SCOPE
This manual contains instructions for operating the COM-120C Communications Service
Monitor. The instruction level is relatively basic and presupposes no previous
experience on the part of the operator with a communication service monitor of this
type. A basic understanding of communication electronics and practical troubleshooting
methods is helpful. It is strongly recommended that the operator be thoroughly familiar
with this manual before attempting to operate the unit.
ORGANIZATION
The COM-120C Operation Manual is composed of the following sections:
SECTION 1 - INTRODUCTION
Provides an introduction to the unit and a brief overview of unit functions.
Specifications are also included in this section.
SECTION 2 - INSTALLATION
Provides a step-by-step procedure for placing the COM-120C into operation.
SECTION 3 - CONTROLS, CONNECTORS AND INDICATORS
Identifies and functionally describes all COM-120C controls, connectors and
indicators. All Operation Screens and Menus are identified and available
parameters listed and explained.
SECTION 4 - OPERATION
Provides instructions for operating the COM-120C Mode Operating Screens and
Menus. In addition, this section contains a selection of basic operating
procedures pertaining to all major functions of the Test Set.
SECTION 5 - COMMON PRACTICES
Identifies and presents some examples of common practices the operator can use
to help become familiar with the COM-120C operation.
SECTION 6 - OPTIONS
Identifies and provides instructions for operating the options available with the
COM-120C.
To Next Page
Loading...
General