4-8
SECTION 4
OPERATION
o If DATA Generator Operation is desired, press F4 to select DTMF for Modulation
Source and cursor to OFF.
Select the desired Modulation Type:
OFF
Modulation OFF.
AM
Range is 0.0% to 100.0% for AM Modulation.
FM
Range is 0.00 to 100 kHz for FM Modulation.
PM
Range is 0.00 to 10 Radians for PM Modulation.
o Enter Deviation/Modulation Level.
Select the desired Format.
MENU
Accesses a menu with available format selections.
Cursor to DCS, DCS INV, POCSAG or POCSAG INV
Format and press ENTER.
o Enter desired Code. Range is 000 (Octal) to 777 (Octal).
Mod Src:
Deviation:
Format:
Code:
DCS
DATA
114
5.0 kHz
FM
To Next Page
Loading...