Intel Stratix 10 - Page 151

h. Write 0x8A[7] to 1 to clear the 0x8A[7] flag.
5. Load pattern [29:20].
a. Write 0x84[7:0] = 0x33.
b. Write 0x85[7:0] = 0x03.
c. Write 0x86[7:0] = 0x19.
d. Write 0x87[7:0] = 0x00.
e. Write 0x90[0] = 1’b1.
f. Read 0x8A[7]. It should be 1.
g. Read 0x8B[0] until it changes to 0.
h. Write 0x8A[7] to 1 to clear the 0x8A[7] flag.
6. Load pattern [39:30].
a. Write 0x84[7:0] = 0xCC.
b. Write 0x85[7:0] = 0x00.
c. Write 0x86[7:0] = 0x19.
d. Write 0x87[7:0] = 0x00.
e. Write 0x90[0] = 1’b1.
f. Read 0x8A[7]. It should be 1.
g. Read 0x8B[0] until it changes to 0.
h. Write 0x8A[7] to 1 to clear the 0x8A[7] flag.
7. Load pattern [49:40].
a. Write 0x84[7:0] = 0x33.
b. Write 0x85[7:0] = 0x03.
c. Write 0x86[7:0] = 0x19.
d. Write 0x87[7:0] = 0x00.
e. Write 0x90[0] = 1’b1.
f. Read 0x8A[7]. It should be 1.
g. Read 0x8B[0] until it changes to 0.
h. Write 0x8A[7] to 1 to clear the 0x8A[7] flag.
8. Load pattern [59:50].
a. Write 0x84[7:0] = 0xCC.
b. Write 0x85[7:0] = 0x00.
c. Write 0x86[7:0] = 0x19.
d. Write 0x87[7:0] = 0x00.
e. Write 0x90[0] = 1’b1.
f. Read 0x8A[7]. It should be 1.
g. Read 0x8B[0] until it changes to 0.
h. Write 0x8A[7] to 1 to clear the 0x8A[7] flag.
9. Load pattern [69:60].
8. Dynamic Reconfiguration Examples
UG-20056 | 2019.02.04
Send Feedback
Intel
®
Stratix
®
10 E-Tile Transceiver PHY User Guide
151