Juniper EX4550 - Table 49: Optical Interface Support and Copper Interface Support for 1-Gigabit

Table 49: Optical interface Support and Copper Interface Support for 1-gigabit SFP Transceivers
in EX4550 Switches
ValueSpecificationEthernet Standard
EX-SFP-1GE-TModel number1000BASE-T
10/100/1000 MbpsRate
RJ-45Connector type
CopperFiber count
–Transmitter wavelength
–Minimum launch power
–Maximum launch power
–Minimum receiver sensitivity
–Maximum input power
CopperFiber type
–Core/Cladding size
–Modal bandwidth
100 m (328 ft )Distance
Not availableDOM support
NoSupport for Virtual Chassis
configuration
•
EX4550-32T-AFI, EX4550-32T-AFO, EX4550-32T-DC-AFI,
EX4550-32T-DC-AFO, EX4550-32F-AFI, EX4550-32F-AFO,
EX4550-32F-DC-AFI, and EX4550-32F-DC-AFO
switches—Junos OS for EX Series switches, Release 12.2 or
later
•
EX4550-32F-S switches—Junos OS for EX Series switches,
Release 12.3R5 or later
Software required
95Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications