Juniper EX4550 Hardware Guide

CHAPTER 31
Agency Approvals and Compliance
Statements
•
Agency Approvals for EX Series Switches on page 303
•
Compliance Statements for EMC Requirements for EX Series Switches on page 304
•
Compliance Statements for Acoustic Noise for EX Series Switches on page 308
Agency Approvals for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
These hardware devices comply with the following standards:
•
Safety
•
CAN/CSA-C22.2 No. 60950-1 Information Technology Equipment
•
UL 60950-1 Information Technology Equipment
•
EN 60950-1 Information Technology Equipment
•
IEC 60950-1 Information Technology Equipment
•
EN 60825-1 Safety of Laser Products - Part 1: Equipment classification and
requirements
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
•
EN 55024
•
EN 300386
303Copyright © 2015, Juniper Networks, Inc.

Juniper EX4550 Specifications

Console Connection Settings

baud rate	9600
data bits	8
stop bits	1