Juniper EX4550 Hardware Guide

Table 58: EX Series Switches Console Port Connector Pinout Information (continued)
DescriptionSignalPin
Signal groundSignal Ground4
Signal groundSignal Ground5
Receive dataRxD Input6
Data carrier detectCD Input7
Clear to sendCTS Input8
Related
Documentation
EX2200 Switches Hardware Overview•
• Rear Panel of an EX3200 Switch
• Rear Panel of an EX3300 Switch
• Rear Panel of an EX4200 Switch
• EX4300 Switches Hardware Overview
• Front Panel of an EX4500 Switch
• EX4550 Switches Hardware Overview on page 3
• Management Panel of an EX4600 Switch
• Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch
• Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch
• Routing Engine (RE) Module in an EX8216 Switch
• Connecting a Switch to a Management Console on page 171
• Configuring the Console Port Type (CLI Procedure)
Mini-USB Port Specifications for an EX4550 Switch
The EX4550 switch has two management console ports: an RJ-45 port and a Mini-USB
Type-B port. The RJ-45 console port and the Mini-USB Type-B port are on the front panel
of the switch. (see Figure 35 on page 125).
Copyright © 2015, Juniper Networks, Inc.124
EX4550 Switch Hardware Guide

Juniper EX4550 Specifications

Console Connection Settings

baud rate	9600
data bits	8
stop bits	1