CHAPTER 28
Radiation and Laser Safety Guidelines and
Warnings
•
Laser and LED Safety Guidelines and Warnings for Switches on page 273
•
Radiation from Open Port Apertures Warning on page 276
Laser and LED Safety Guidelines and Warnings for Switches
EX Series switches, OCX1100 switches, and the XRE200 External Routing Engine are
equipped with laser transmitters, which are considered a Class 1 Laser Product by the
U.S. Food and Drug Administration and are evaluated as a Class 1 Laser Product per EN
60825-1 requirements.
Observe the following guidelines and warnings:
•
General Laser Safety Guidelines on page 273
•
Class 1 Laser Product Warning on page 274
•
Class 1 LED Product Warning on page 274
•
Laser Beam Warning on page 275
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
273Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
Console Connection Settings
