CHAPTER 11
Unpacking the Switch
•
Unpacking an EX4500 Switch on page 143
•
Parts Inventory (Packing List) for an EX4500 Switch on page 143
•
Registering Products—Mandatory for Validating SLAs on page 145
Unpacking an EX4500 Switch
The EX4500 switches are shipped in a cardboard carton, secured with foam packing
material. The carton has an accessory compartment and contains the quick start
instructions.
CAUTION: EX4500 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
1. Open the carton.
2. Pull out the packing material holding the switch in place.
3. Verify the parts received against the inventory on the label attached to the carton.
See “Parts Inventory (Packing List) for an EX4500 Switch” on page 143.
4. Save the shipping carton and packing materials in case you need to move or ship the
switch later.
Related
Documentation
Installing and Connecting an EX4500 Switch•
• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 187
• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 190
Parts Inventory (Packing List) for an EX4500 Switch
The switch shipment includes a packing list. Check the parts you receive with the switch
against the items on the packing list. The packing list specifies the part number and
description of each part in your order. The parts shipped depend on the switch model
you order. See EX4500 Switch Models for more information.
143Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
Console Connection Settings
