[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
6. Configure an administrator account on the device. When prompted, enter the password for the
administrator account.
[edit]
root@# set system login user admin class super-user authentication plain-text-password
New password: password
Retype new password: password
7. Commit the configuration to activate it on the device.
[edit]
root@# commit
8. Log in as the administrative user you configured in step 6.
9. Configure the name of the device. If the name includes spaces, enclose the name in quotation marks
(“ ”).
configure
[edit]
admin@# set system host-name host-name
10. Configure the IP address and prefix length for the Ethernet management interface on the services
gateway’s Routing Engine.
[edit]
admin@# set interfaces fxp0 unit 0 family inet address address/prefix-length
11. Configure the traffic interface.
[edit]
admin@# set interfaces xe-2/0/0 unit 0 family inet address address/prefix-length
admin@# set interfaces xe-2/2/5 unit 0 family inet address address/prefix-length
210
To Next Page
Loading...
