Juniper SRX5400 - Page 347

Table 53: Chassis Component Alarm Conditions on SRX5400, SRX5600, and SRX5800 Services
Gateways (continued)
Alarm
SeverityRemedyAlarm Condition
Chassis
Component
YellowInsert SCB into empty slot.An SCB has been removed.
System Control
Board (SCB)
YellowReplace failed SCB.An SCB temperature sensor
alarm has failed.
RedReplace failed SCB.An SCB has failed.
Yellow
•
Check fabric plane
summary if all 4 fabric
planes are online.
•
This alarm could be
raised before all fabric
planes are brought up. It
will be cleared after at
least 4 planes are up.
•
If all planes are up and
still seeing alarms, raise
a case using the Case
Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada)
or 1-408-745-9500
(from outside the United
States)
An SCB throughput
decreased.
351