Keithley 2280 Series Reference Manual

Section 2: General operation Series 2280 Precision DC Power Supply Reference Manual
2-84 077085503 / March 2019
To save a user setup to external USB flash drive using SCPI commands:
Send the command:
:MMEMory:SAVE:SETup "mysetup"
Save the present setup to the external USB flash drive as mysetup.
Recall a user setup
You can recall setups from internal nonvolatile memory or external USB flash drive. When you recall
a setup, the instrument returns to the settings that are saved in memory.
To recall a saved setup from internal nonvolatile memory using the front panel:
1. Press the MENU key.
2. Under System, select Save/Recall.
3. Select the button next to Recall and press the ENTER key. The Save/Recall Location window is
displayed.
4. Select a saved setup in the pop-up window.
5. Press the ENTER key. The selected setup is applied to the instrument.
To recall a saved setup from external USB flash drive using the front panel:
1. Press the MENU key.
2. Under System, select Save/Recall.
3. Select the button next to Recall and press the ENTER key. The Save/Recall Location window is
displayed.
4. Select Recall From USB and press the ENTER key. The Save/Recall Location window is
displayed.
5. Select a saved setup in the pop-up window.
6. Press the ENTER key. The selected setup is applied to the instrument.
To recall a user setup from internal memory using SCPI commands:
*RCL <n>
Where <n> is an integer between 1 and 5 that represents the saved setup.
To recall a user setup from external USB flash drive using SCPI commands:
:MMEMory:LOAD:SETup "mysetup"
Recall the setup named mysetup in the external USB flash drive to the instrument.

Keithley 2280 Series Specifications

General

Brand	Keithley
Model	2280 Series
Category	Power Supply
Language	English