Keithley 2280 Series Reference Manual

Section 7: SCPI command reference Series 2280 Precision DC Power Supply Reference Manual
7-56 077085503 / March 2019
:OUTPut:DELay:STATe
This command enables and disables the delay time that the instrument waits before enabling and disabling the
specified output.
Type
Affected by
Where saved
Default value
Command and query
Recall settings
Instrument reset
Power cycle
Save settings
0 (OFF)
Usage
:OUTPut:DELay:STATe <state>
:OUTPut:DELay:STATe?
<state>
Disable output delay: OFF or 0
Enable output delay: ON or 1
Details
When output delay is set to ON, the instrument waits the specified delay time before turning on and
off the output. For details, refer to Output delay (on page 3-6).
Separate delays can be programmed for the off-to-on and the on-to-off transition using the following
commands:
 :OUTPut:DELay:RISing
 :OUTPut:DELay:FALLing
Example
:OUTP:DEL:STAT ON
Enable the output delay
Also see
:OUTPut:DELay:FALLing (on page 7-54)
:OUTPut:DELay:RISing (on page 7-55)

Keithley 2280 Series Specifications

General

Brand	Keithley
Model	2280 Series
Category	Power Supply
Language	English