Keithley 2280 Series Reference Manual

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-67
:SENSe[n]:<function>:RANGe
This command sets the measurement range for measurements of the selected function.
Type
Affected by
Where saved
Default value
Command and query
Power cycle
Save settings
Concurrent: 10 mA
Current: 10 mA
Voltage: 33 V for Model 2280S-
32-6; 61 V for Model 2280S-60-3
Usage
:SENSe[n]:CONCurrent[:DC]:RANGe <range>
:SENSe[n]:CONCurrent[:DC]:RANGe?
:SENSe[n]:CONCurrent[:DC]:RANGe? DEFault
:SENSe[n]:CONCurrent[:DC]:RANGe? MINimum
:SENSe[n]:CONCurrent[:DC]:RANGe? MAXimum
:SENSe[n]:CURRent[:DC]:RANGe <range>
:SENSe[n]:CURRent[:DC]:RANGe?
:SENSe[n]:CURRent[:DC]:RANGe? DEFault
:SENSe[n]:CURRent[:DC]:RANGe? MINimum
:SENSe[n]:CURRent[:DC]:RANGe? MAXimum
:SENSe[n]:VOLTage[:DC]:RANGe <range>
:SENSe[n]:VOLTage[:DC]:RANGe?
[n]
Channel number: For single-channel instruments, the value is 1
<range>
Set this command to a specific value or a preset value. See Details.
Details
This command is primarily intended to eliminate the time that is required by the instrument to select
an automatic range.
The options for <range> are described in the following table.
Measurement function
Measure ranges
Concurrent
0.01 A, 0.1 A, 1 A, and 10 A
Current
0.01 A, 0.1 A, 1 A, and 10 A
Voltage
32 V for Model 2280S-32-6; 60 V for Model 2280S-
60-3
When you select a fixed range, an overrange condition can occur.
When you set a value for the measurement range, the measurement autorange setting is
automatically disabled for the measurement function.

Keithley 2280 Series Specifications

General

Brand	Keithley
Model	2280 Series
Category	Power Supply
Language	English