Keithley 2280 Series - Status:operation:instrument:isummary:condition; Status:preset

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-105
:STATus:OPERation:INSTrument:ISUMmary:CONDition?
This command reads the Operation Instrument Summary Condition Register of the status model.
Type
Affected by
Where saved
Default value
Query only
Not applicable
Not applicable
Not applicable
Usage
:STATus:OPERation:INSTrument:ISUMmary:CONDition?
Details
This command reads the contents of the Operation Instrument Summary Condition Register.
For details about interpreting the value of a register, see Operation Instrument Summary Event
Register (on page D-13).
Example
:STAT:OPER:INST:ISUM:COND?
Returns the contents of the Operation
Instrument Summary Condition Register of
the status model.
Also see
Operation Instrument Summary Event Register (on page D-13)
:STATus:PRESet
This command resets all the device-dependent enable registers.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:STATus:PRESet
Details
Sending this command can reset the bits of the following enable registers to 0:
 Operation Event Enable Register
 Operation Instrument Event Enable Register
 Operation Instrument Summary Event Enable Register
 Measurement Event Enable Register
 Measurement Instrument Event Enable Register
 Measurement Instrument Summary Event Enable Register
 Questionable Event Enable Register
 Questionable Instrument Event Enable Register
 Questionable Instrument Summary Event Enable Register