Keithley 2280 Series - [:Source[N]]:Delay:state

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-75
[:SOURce[n]]:DELay:STATe
This command enables or disables the delay that occurs when the source is turned on.
Type
Affected by
Where saved
Default value
Command and query
Recall settings
Instrument reset
Power cycle
Save settings
1 (ON)
Usage
[:SOURce[n]]:DELay:STATe <state>
[:SOURce[n]]:DELay:STATe?
[n]
Channel number: For single-channel instruments, the value is 1
<state>
Disable the source delay: OFF or 0
Enable the source delay: ON or 1
Details
This command is used to enable or disable source delay. When enabled, the instrument will delay for
a period that is set by the command:
[:SOURce[n]]:DELay
Example
:DEL:STAT ON
:DEL:STAT?
Turn on source delay and query the state. The
output is: 1.
Also see
[:SOURce[n]]:DELay (on page 7-74)