Section 2: General operation Series 2280 Precision DC Power Supply Reference Manual
2-70 077085503 / March 2019
How to install the Keithley I/O Layer
Before installing, it is a good practice to check the Product Support web page (tek.com/product-
support) to see if a later version of the Keithley I/O Layer is available. Search for Keithley I/O
Layer.
You can download the Keithley I/O Layer from the Keithley website.
The software installs the following components:
Microsoft
®
.NET Framework
NI
TM
IVI Compliance Package
NI-VISA
TM
Run-Time Engine
Keithley SCPI-based Instrument IVI-C driver
Keithley I/O Layer
To install the Keithley I/O Layer from the Keithley website:
1. Download the Keithley I/O Layer Software from the Product Support web page (tek.com/product-
support), as described above. The software is a single compressed file and should be
downloaded to a temporary directory.
2. Run the downloaded file from the temporary directory.
3. Follow the instructions on the screen to install the software.
4. Reboot your computer to complete the installation.
To Next Page
Loading...
Need help?
General
