Keithley 2280 Series Reference Manual

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-113
:SYSTem:COMMunication:ABORt
This command causes the remote control to transfer to the present interface.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
SYSTem:COMMunication:ABORt
Details
The instrument supports the following interfaces:
 USB
 LAN
 GPIB
 LXI
Only one interface may be connected at a time. When one interface is active, all the others are
blocked.
When this command is sent by one of the interfaces, the present active interface is blocked, and the
interface that sends SYST:COMM:ABOR becomes active.
Before you use this command to get control of the instrument, make sure this interface is unlocked. If
the interface is locked, sending SYST:COMM:ABOR causes error 511, "Communication not permitted:
This interface is locked, send SYSTem:PASSword:UNLock with a password to unlock it."
Example
:SYSTem:COMMunication:ABORt
For example, if the present active interface is USB,
send this command through GPIB. After that, GPIB
is activated and USB is blocked.
Also see
:SYSTem:PASSword:MODE (on page 7-122)
:SYSTem:PASSword:UNLock (on page 7-123)

Keithley 2280 Series Specifications

General

Brand	Keithley
Model	2280 Series
Category	Power Supply
Language	English