Keithley 2280 Series - Calibration Subsystem; Calibration:protected:cancel

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-35
CALibration subsystem
The commands in this subsystem configure and control the calibration operations.
:CALibration:PROTected:CANCel
This command cancels the calibration procedures and drops the new constants.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:CALibration:PROTected:CANCel
Details
When this command is sent, the instrument cancels the calibration and loses the new calibration
constants.
Example
:CAL:PROT:CANC
Cancels the calibration procedure and reverts the
constants.
Also see
None