Keithley 2280 Series Reference Manual

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-81
[:SOURce[n]]:LIST<listNumber>:<element>
This command allows you to set up and query a list of custom values for a specified list.
Type
Affected by
Where saved
Default value
Command only
Instrument reset
Nonvolatile memory
Not applicable
Usage
[:SOURce[n]]:LIST<listNumber>:<element> <string>
[:SOURce[n]]:LIST<listNumber>:<element>?
[n]
Channel number: For single-channel instruments, the value is 1
<listNumber>
The list number: 1 to 9
<element>
The elements that each list step contains:
 Current source value: CURRent
 Voltage source value: VOLTage
 The dwell time of each list step: DWELl
<string>
The setting values delimited by commas; the maximum length of a string
is 2048
Details
This command defines a list of up to 99 values for a specified list. Creating a list with more than 99
step points results in error 201,"Too many list points."
When you specify the values for a list, you should keep the value order in the string identical with the
sequence that the list executes.
To add source values to an existing list, use the following command:
[:SOURce[n]]:LIST<listNumber>:<element>:APPend
All of the values specified by this command are temporary until they are saved by sending the
[:SOURce[n]]:LIST:SAVE:INTernal command.
To create a valid list, the number of points for voltage, current, and dwell must be the same. If they
are not the same, when you save the list by sending the [:SOURce[n]]:LIST:SAVE:INTernal
command, the instrument will generate error 202, "List lengths not equivalent."

Keithley 2280 Series Specifications

General

Brand	Keithley
Model	2280 Series
Category	Power Supply
Language	English