Keithley 2280 Series - Trace[N]:Trigger:current:state

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-145
Example
TRAC:TRIG:CURR 1
TRAC:TRIG:CURR?
The current threshold value is set to 1.
Also see
:TRACe[n]:TRIGger:CURRent:STATe (on page 7-145)
:TRACe[n]:TRIGger:CURRent:DIRection (on page 7-144)
:TRACe[n]:TRIGger:CURRent:STATe
This command determines whether the current level trigger function is enabled.
Type
Affected by
Where saved
Default value
Command and query
Power cycle
Not applicable
0 (OFF)
Usage
:TRACe[n]:TRIGger:CURRent:STATe <state>
:TRACe[n]:TRIGger:CURRent:STATe?
<state>
ON or 1: Enable the current level trigger function
OFF or 0: Disable the current level trigger function
Example
TRAC:TRIG:CURR:STAT 1
TRAC:TRIG:CURR:STAT?3
The current level trigger function is enabled.
Also see
:TRACe[n]:TRIGger:CURRent[:LEVel] (on page 7-144)
:TRACe[n]:TRIGger:CURRent:DIRection (on page 7-144)