Keithley 2280 Series Reference Manual

Series 2280 Precision DC Power Supply Reference Manual Section 7: SCPI command reference
077085503 / March 2019 7-53
Example
:MMEMory:LOAD:SETup "mysetup"
Recall the setup named mysetup in the external
USB flash drive to the instrument.
Also see
:MMEMory:SAVE:SETup (on page 7-53)
*RCL (on page 7-6)
*SAV (on page 7-7)
:MMEMory:SAVE:SETup
This command exports the present setup to the external USB flash drive.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:MMEMory:SAVE:SETup <fileName>
<fileName>
A string that contains a name for the saved setup (maximum 8 characters)
Detail
This command allows you to save the present instrument setup to the external USB flash drive.
Make sure that the external USB flash drive is connected to the instrument before you send this
command. An unstable connection between the USB flash drive and the instrument will cause an
error 520, "No USB flash drive found."
Example
:MMEMory:SAVE:SETup "mysetup"
Save the present setup to the external USB flash
drive as mysetup.
Also see
:MMEMory:LOAD:SETup (on page 7-52)
*RCL (on page 7-6)
*SAV (on page 7-7)

Keithley 2280 Series Specifications

General

Brand	Keithley
Model	2280 Series
Category	Power Supply
Language	English