Keithley 2280 Series - Page 155

Series 2280 Precision DC Power Supply Reference Manual Section 3: Functions and features
077085503 / March 2019 3-41
Data buffer settings that cause an error
Setting
Front-panel operations
SCPI commands
Buffer
 MENU > Data Buffers >
Size
 MENU > Data Buffers >
Mode
 MENU > Data Buffers >
Auto Clear
 MENU > Data Buffers >
Units
 :TRACe[n]:CLEar:AUTO or :DATA[n]:CLEar:AUTO
(on page 7-135)
 :TRACe[n]:FEED or :DATA[n]:FEED (on page 7-
140)
 :TRACe[n]:CLEar or :DATA[n]:CLEar (on page 7-
135)
 :TRACe[n]:FEED:CONTrol or
:DATA[n]:FEED:CONTrol (on page 7-141)
Trigger settings that cause an error
Setting
Front-panel operations
SCPI commands
Trigger
 MENU > Trigger
Configure > List Type
 MENU > Trigger
Configure > Idle
 MENU > Trigger
Configure > Arm Source
 MENU > Trigger
Configure > Arm Count
 MENU > Trigger
Configure > Trigger
Source
 MENU > Trigger
Configure > Trigger
Count
 MENU > Trigger
Configure > Sample
Count
 HOME > Acquire
 :TRIGger[:SEQuence[n]]:SOURce (on page 7-151)
 :TRIGger[:SEQuence[n]]:COUNt (on page 7-149)
 :TRIGger[:SEQuence[n]]:SAMPle:COUNt (on page
7-150)
 :ARM[:SEQuence[n]]:COUNt (on page 7-19)
 :ARM[:SEQuence[n]]:SOURce (on page 7-20)
 :INITiate[n]:CONTinuous (on page 7-51)
System settings that cause an error
Setting
Front-panel operations
SCPI commands
Recall
MENU > System Save/Recall>
Recall
*RCL (on page 7-6)
Product Demo
MENU > System Information >
Demo
Not applicable
Calibration
MENU > System Information >
Calibrate
CALibration subsystem (on page 7-34)