Keysight E4980A/AL User’s Guide -443
Error Messages
Error Messages
-
62 Bias off, Turn bias on
DC bias sweep is performed with the DC BIAS function OFF.
Suggestion:
Set the DC BIAS function to ON.
63 DC source off, Turn DC source on
DC source sweep is performed with the DC source function OFF.
Suggestion:
Set the DC source function to ON.
70 Handler I/F not installed
The handler interface function is set to ON in a model that does not have a
handler interface board (option 201).
Suggestion:
Press System button in the front panel and check the OPTION.
71 Scanner I/F not installed
Operation that requires option 301 is performed in a model that does not have
a scanner interface board (option 301).
Suggestion:
Press System button in the front panel and check the OPTION.
73 I BIAS I/F not installed
The DC bias interface function is set to ON in a model that does not have the
DC bias interface board (option 002).
Suggestion:
Press System button in the front panel and check the OPTION.
82 Store failed
User attempts to save data into the USB memory when a USB memory device
is not inserted. This error may appear when you attempt to save data
immediately after inserting the USB memory into the E4980A/AL. You need to
wait for a few seconds after inserting the USB.
Suggestion:
Prepare the USB memory device or save data into number 0 to 9.
To Next Page
Loading...
