100 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
6 Reference Waveforms
To clear a
reference
waveform location
1 From the menu, choose Sources > Reference Waveforms....
2 In the Reference Waveform dialog box tab for the location you want to clear,
select Clear R1/R2 to clear the reference waveform location.
Reference waveforms are also cleared by a Factory Default or Secure Erase (see
Chapter 21, “Save/Email/Recall (Setups, Screens, Data),” starting on page 261).
To display a reference waveform
1 From the menu, choose Sources > Reference Waveforms....
2 In the Reference Waveform dialog box tab for the waveform you want to
display, select On to enable/disable the reference waveform display.
See Also •
"To display reference waveform summary information" on page 101
To scale and position reference waveforms
1 From the menu, choose Sources > Reference Waveforms....
2 In the Reference Waveform dialog box tab for the waveform you want to scale
or position, use the Scale and Offset controls.
To Next Page
Loading...
