296 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
23 Web Interface
Remote Programming with Keysight IO Libraries
While the SCPI Commands applet window lets you enter and remote programming
commands, remote programming for automated test and data acquisition is
typically done using the Keysight IO Libraries, which are separate from the
instrument's web interface.
The Keysight IO Libraries let a controller PC communicate with Keysight
InfiniiVision oscilloscopes via their USB or LAN interfaces.
The Keysight IO Libraries Suite connectivity software enables communication over
these interfaces. You can download the Keysight IO Libraries Suite from
www.keysight.com/find/iolib.
Information about controlling the oscilloscope through remote commands is
contained in the Programmer's Guide.
For more information about connecting to the oscilloscope, refer to the Keysight
Technologies USB/LAN/GPIB Interfaces Connectivity Guide. For a printable
electronic copy of the Connectivity Guide, direct your Web browser to
www.keysight.com and search for "Connectivity Guide".
To Next Page
Loading...
