Keysight InfiniiVision HD3 Series - To Scale the GUI Larger or Smaller; Setting the Oscilloscopes Clock; See also • Setting the Oscilloscopes Clock

Utility Settings 22
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 281
• From the Acq Mode drop-down list, select whether the acquisition mode
should be preserved during autoscale:
• Normal — Switches to Normal acquisition mode whenever the [Auto Scale]
key is pressed. This is the default mode.
• Preserve — Causes the oscilloscope to keep the acquisition mode setting
selected when the [Auto Scale] key is pressed.
To scale the GUI larger or smaller
You can select between larger or smaller fonts and dialog boxes in the graphical
user interface.
1 From the main menu, choose Utilities > User Options....
2 In the User Options dialog box, select the Preferences tab.
3 In the GUI Scale Factor area, select Scale GUI Larger or Scale GUI Smaller.
Setting the Oscilloscope's Clock
Because screen captures and other items show the oscilloscope clock (date/time)
settings, you want the oscilloscope clock to be correct. Licenses also rely on
correct oscilloscope clock settings.
To set the date and time:
1 From the main menu, choose Utility > User Options....
2 In the User Options dialog box, select the Clock tab.
3 The Clock tab of the User Options dialog box has these controls for setting up
and displaying the oscillosope's date and time:
• Show — When selected, the oscilloscope's date and time appear on the
display.
• Show Date & Time in Grid — When selected, the oscilloscope's date and time
appear in the first waveform grid; otherwise, the date and time appear in the
badges bar at the top of the display.
• Time Zone — Select the oscilloscope's time zone.
• Network Time Protocol — The oscilloscope's time is synchronized with the
network time.