Utility Settings 22
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 283
To enable remote command logging:
1 From the main menu, choose Utilities > User Options....
2 In the User Options dialog box, select the Remote Log tab.
3 Select Enable to enable or disable the remote command logging feature.
When remote logging is enabled, additional debug information can be included
in the returned error string. If the error is detected by the SCPI command
parser, such as a header error or other syntax error, the extra debug
information is generated and included. But if the error is detected by the
oscilloscope system, such as when an out-of-range value is sent, then no extra
debug information is included.
4 From the Destination drop-down list, select whether remote commands are
logged to a text file (on a connected USB storage device), logged to the screen,
or both.
5 From the Write Mode drop-down list, select whether logged commands will be
created in a new list or appended to existing logged commands.
Your selection takes effect when remote command logging is enabled.
This option applies to both screen and file logging.
6 Select File Name to open the Remote Log Filename dialog box where you can
specify the name of the file (on the USB storage device) to which remote
commands are logged.
7 Select Remote Log to open the Remote Log dialog box that contains the logged
commands.
8 Select Transparent to disable or enable a transparent background for the
Remote Log dialog box.
Enable to make the background transparent. This lets you view underlying
waveforms.
Disable for a solid background which makes the logged remote commands
easier to read.
Setting Enhanced Security Options
With the Enhanced Security license, you can disable features to further secure the
oscilloscope.
To Next Page
Loading...
