360 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
29 UART/RS232/422/485 Triggering and Protocol Decode
Interpreting UART/RS232/422/485 Decode
• Angled waveforms show an active bus (inside a packet/frame).
• Mid-level blue lines show an idle bus.
• When using 5-8 bit formats, the decoded data is displayed in white (in binary,
hex, or ASCII).
• When using the 9 bit format, all data words are displayed in green, including
the 9th bit. The 9th bit is displayed on the left.
• When a data word value is selected for framing, it is displayed in light blue.
When using 9-bit data words, the 9th bit will also be displayed in light blue.
• Decoded text is truncated at the end of the associated frame when there is
insufficient space within frame boundaries.
• Pink vertical bars indicate you need to expand the horizontal scale (and run
again) to see decode.
• When the horizontal scale setting does not permit the display of all available
decoded data, red dots will appear in the decoded bus to mark the location of
hidden data. Expand the horizontal scale to allow the data to display.
• An unknown (undefined) bus is shown in red.
• A parity error will cause the associated data word to be shown in red, which
includes the 5-8 data bits and the optional 9th bit.
To Next Page
Loading...
