123
Keysight InfiniiVision HD3-Series Oscilloscopes
User's Guide
9 Display Settings
To change the waveform layout / 123
To set or clear persistence / 124
To clear the display / 126
To select the grid options / 126
To adjust the grid intensity / 127
To display and edit waveform labels / 127
To add an annotation / 130
To adjust waveform intensity / 132
See Also • "Setting the Oscilloscope's Clock" on page 281
To change the waveform layout
1 From the menu, choose Setup > Display....
2 In the Display dialog box, select the Waveform Layout tab.
3 Select the Waveform Layout drop-down list, and select between:
• Stack Waveforms Vertically — Waveforms appear in individual grids that are
vertically stacked.
• Tile Waveforms Horizontally — Waveforms appear in individual grids that are
horizontally tiled and perhaps vertically stacked, depending on the number
of waveforms that are displayed.
• Overlay Waveforms — Waveforms are overlaid in one grid.
• Custom Layout — Lets you specify the number of grids, their orientation, and
which waveforms appear in which grid.
Select Custom Layout... to open the Custom Layout dialog box:
To Next Page
Loading...
