Keysight InfiniiVision HD3 Series - To Set up and Run the Analysis

246 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
19 Frequency Response Analysis
To set up and run the analysis
1 From the main menu, choose Analyze > Frequency Response....
2 In the Frequency Response dialog box, select Enable.
3 Click the Open Dialog... softkey to open the Frequency Response Analysis dialog
box.
4 In the Frequency Response dialog box's Setup tab:
There are settings for:
DUT
(Transfer Function)
Input Output
Wave
Gen
1
2
3
4
Oscilloscope