Keysight InfiniiVision HD3 Series - To Turn the Label Display on or off; To Assign a Predefined Label to a Waveform; To Define a New Label

128 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
9 Display Settings
To turn the label display on or off
1 From the menu, choose Setup > Display....
2 In the Display dialog box, select the Labels tab.
3 Select On to turn the labels on or off for the displayed waveforms.
Labels are displayed at the left edge of the displayed traces.
4 To adjust the vertical Y position of the label with respect to the reference level,
use the Offset field.
To assign a predefined label to a waveform
1 From the menu, choose Setup > Display....
2 In the Display dialog box, select the Labels tab.
3 Select the Source for label assignment.
The waveform does not have to be turned on to have a label assigned to it.
4 From the Library drop-down list, select the predefined label.
5 Select Apply New Label to assign the label to the selected waveform.
To define a new label
1 From the menu, choose Setup > Display....
2 In the Display dialog box, select the Labels tab.
3 Select the New Label field.