Display Settings 9
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 127
• Show Dual Scales — When multiple waveforms are displayed in a grid, you can
enable dual vertical scales for the top two waveforms in the Z-order. Select
the dual scales for a pop-up dialog box that lets you specify the waveform
Z-order.
• Show Scales in Grid — You can show scales within the grid to make the grid
areas a little larger. In this case, waveforms can be drawn over grid values at
the right side and bottom of the grid.
To adjust the grid intensity
To adjust the display grid (graticule) intensity:
1 From the menu, choose Setup > Display....
2 In the Display dialog box, select the Grids tab.
3 In the Grid Intensity field, enter a value from 0 to 100%.
Each major vertical division in the grid corresponds to the vertical sensitivity
shown in the status line at the top of the display.
Each major horizontal division in the grid corresponds to the time/div shown in
the status line at the top of the display.
To display and edit waveform labels
You can define labels and assign them to analog input channels, math functions,
reference waveforms, digital channels, and buses.
• "To turn the label display on or off" on page 128
• "To assign a predefined label to a waveform" on page 128
• "To define a new label" on page 128
• "To load a list of labels from a text file you create" on page 129
• "To reset the label library to the factory default" on page 130
To Next Page
Loading...
