Horizontal Controls 2
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 53
To navigate search events
When acquisitions are stopped, you can use the navigation controls to go to found
search events (set using Analyze > Search... and the Search dialog box, see
"Searching for Events" on page 51).
1 From the menu, choose Analyze > Navigate....
2 In the Navigate dialog box, select the Search navigation type.
3 Select the back and forward navigation buttons to go to the previous or
next search event.
When searching Protocol Decode:
• You can press the stop key to set or clear a mark.
• The Auto zoom option specifies whether the waveform display is automatically
zoomed to fit the marked row as you navigate.
• The Scroll Lister option lets you use the Entry knob to scroll through data rows in
the Lister display.
To navigate segments
When the segmented memory acquisition is enabled and acquisitions are stopped,
you can use the navigation controls to play through the acquired segments.
1 From the menu, choose Analyze > Navigate....
2 In the Navigate dialog box, select the Segments navigation type.
3 For the Play Mode, you can select:
• Manual — to play through segments manually.
In the Manual play mode:
• Select the back and forward buttons to go to the previous or next
segment.
• Select the button to go to the first segment.
• Select the button to go to the last segment.
• Select the button to go to the next page of segments.
• Select the button to go to the previous page of segments.
• Auto — to play through segments in an automated fashion.
In the Auto play mode:
To Next Page
Loading...
