294 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
23 Web Interface
Accessing the Web Interface
To access the oscilloscope's web interface:
1 Connect the oscilloscope to your LAN (see "To establish a LAN connection" on
page 275) or establish a point-to-point connection (see
"Stand-alone
(Point-to-Point) Connection to a PC"
on page 276).
It is possible to use a point-to-point connection, but using a normal LAN
connection is the preferred method.
2 Type the oscilloscope's hostname or IP address in the web browser.
The oscilloscope's web interface Welcome Page is displayed.
To Next Page
Loading...
