Save/Email/Recall (Setups, Screens, Data) 21
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 263
The Increment option enables or disables automatically incremented file names.
Auto increment adds a numeric suffix to your file name and increments the
number with each successive save. It will truncate characters as necessary
when the file name length is at maximum and more digits are required for the
numeric portion of the file name.
5 Use the controls in the bottom of the dialog box to navigate to the location of
the file to be saved.
6 Select Save.
A message indicating whether the save was successful is displayed.
You can also configure the Setup > (Quick Action) menu item to save setups, screen
images, or data. See "Configuring the (Quick Action) Menu Item" on page 291.
To save setup files
Setup files can be saved to internal hard drive (\User Files) locations or to an
external USB storage device.
1 From the main menu, choose File > Save....
2 In the Save dialog box, from the Format drop-down menu, select Setup (*.scp).
3 Select the File Name field, and enter the name of the file you want to save.
4 Use the controls in the bottom of the dialog box to navigate to the location of
the file to be saved.
5 Select Save.
To save BMP or PNG image files
Image files can be saved to an external USB storage device.
1 From the main menu, choose File > Save....
2 In the Save dialog box, from the Format drop-down menu, select one of:
• 24-bit Bitmap image (*.bmp)
• PNG 24-bit image (*.png)
3 With image files, you can select these options:
• Setup Info — Setup information (vertical, horizontal, trigger, acquisition,
math, and display settings) is also saved in a separate file with a TXT
extension.
4 Select the File Name field, and enter the name of the file you want to save.
5 Use the controls in the bottom of the dialog box to navigate to the location of
the file to be saved.
6 Select Save.
To Next Page
Loading...
